【英文标准名称】:Hydraulicfluidpower-Generalrulesrelatingtosystems
【原文标准名称】:液压传动与系统相关的一般规则
【标准号】:ISO4413-1998
【标准状态】:作废
【国别】:国际
【发布日期】:1998-08
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC131
【标准类型】:()
【标准水平】:()
【中文主题词】:液压传动;液压管路;液压设备;元部件;维修;流体技术;液压装置;规范(验收);安全要求;规范;定义;定义
【英文主题词】:Acceptance(approval);Accessories;Agreements;Circuitdiagrams;Components;Containers;Contractors;Control;Dataofthemanufacturer;Definitions;Design;Documentations;Filtration;Fluidcircuits;Fluidreceivers;Fluidtechnology;Generalconditions;Generalsection;Guidelines;Hazards;Heatexchangers;Hoseassemblies;Hydrauliccylinders;Hydraulicequipment;Hydraulicfluidpower;Hydraulicmotors;Hydraulicpumps;Hydraulicsystems;Hydraulicvalves;Hydraulics;Hydropneumaticaccumulators;Instructions;Maintenance;Marking;Materials;Mounting;Operation;Orderer;Pipelines;Piping;Plantconstruction;Preparation;Pressureliquids;Safetyrequirements;Seals;Specification;Specification(approval);Transport;Valves
【摘要】:ThisInternationalStandardprovidesgeneralrulesrelatingtohydraulicsystemsonmachineryusedinindustrialmanufacturingprocesses.Itisintendedasaguideforbothsuppliersandpurchasers,withaviewtoensuring:a)safety;b)uninterruptedsystemoperation;c)easeandeconomyofmaintenance;d)longlifeofthesystem.
【中国标准分类号】:J20
【国际标准分类号】:23_100_01
【页数】:68P.;A4
【正文语种】:英语
基本信息
| 标准名称： | 填充聚四氟乙烯软带导轨 技术条件 |
| 英文名称： | Techique specification of filled polytetrafluoroethylene slideway soft strips |
| 中标分类： |
化工 >>
合成材料 >>
塑料型材 |
| ICS分类： |
橡胶和塑料工业 >>
橡胶和塑料制品 >>
其他橡胶和塑料制品
|
| 替代情况： | JB/T 7899-1995(原标准号GB 10905-1989) |
| 发布部门： | 全国塑料标委会工业塑料制品分会 |
| 发布日期： | 1999-06-24 |
| 实施日期： | 2000-06-24 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 1900-01-01 |
| 归口单位： | 全国塑料标委会机械工业塑料制品分会 |
| 出版日期： | 1900-01-01 |
| 页数： | 6页 |
适用范围
JB/T 7899-1999 本标准是对 JB/T 7899-95《填充聚四氟乙烯软带导轨 技术条件》的修订。 本标准规定了粘结填充聚四氟乙烯软带导轨的材料，设计，粘接，加工装配的技术要求。 本标准适用于金属切削机床和测量仪器的软带导轨。其它机械的软带导轨亦应参照使用。 本标准于 1989 年以 GB 10905-89 首次发布，于 1996 年 4 月 14 日调整为 JB/T 7899-95。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 化工 合成材料 塑料型材 橡胶和塑料工业 橡胶和塑料制品 其他橡胶和塑料制品
Product Code:SAE J2337/1
Title:Connections for Fluid Power and High Pressure Use--Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing--Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods
Issuing Committee:Hydraulic Tube Fittings Committee
Scope:PurposeThis part of SAE J2337 specifies dimensions, design, and performance requirements for eight ports using a conical seal to insure leak proof performance with a design factor of 4 to 1.Field of ApplicationThese connectors are intended for general and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Table 1. Since many factors influence the pressure at which hydraulic systems will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that the required performance levels are met.For use of these connectors in conditions outside the pressure and temperature limits specified, contact the manufacturer.